Skip Navigation Links.
Publications

Staff Publications

Journal Publications

79

Conference Proceedings

78

A)Journal Publications

A.1 Year 2007/2008

  1. Ramesh Ramakirshnasamy, jerald, j, Paravasu, Asokan; G, Prabhakaran,  “Simultaneous Optimization of Design and Manufacturing Tolerances for Quality with Form Control in Assembly"  submitted to int’l journal of Production Research, Sep’2007
  2. V.Anbumalar And G.Prabhakaran, “Dynamic Environment Machine Layout In Cellular Manufacturing System: A Case Study, accepted for Publication Caledonian Journal Of Engineering, Oman, Sep,2007
  3. R.Saravanan, L.Govindarajan and T.KarunanithiA New methodology for the prediction of mass transfer coefficient for spillage of chemicals, Journal of Applied Science and Environmental Management. 11(2), p.35-32.
  4. L. Govindarajan, M. Rajasimman and C. Karthikeyan Artificial Neural Network Modeling of Inverse Fluidized Bed Reactor used for treating Starch Industry Wastewater, Journal of Applied Science and Environmental Management. 11(1) p.35-44.
  5. Dr Syed Anisuddin, Dr NV Ramamoorthy and Dr Srihari Rao, “Development of a Combined Mode – Split and Equilibrium Traffic Assignment Model for a Corridor”, Journal of Indian Roads Congress, New Delhi
  6. Dr Syed Anisuddin, Dr NV Ramamoorthy and Dr Srihari Rao “Development of Back propagation Network Model for Transit Demand Estimation”, Arabian Journal for Science & Engineering, KFUPM, Dhahran, S.A.
  7. S M Rizwan, KhuranaVipin and TanejaGulshan “Modeling and Optimization of a Single unit PLCs’ System” International Journal of Modeling and Simulation, Canada, Vol.27 No.4, p.361-368
  8. S M Rizwan and Ahmed Mohiuddin “Probabilistic analysis of an industrial system” paper published in Sultan Qaboos University Journal of Science, Sultanate of Oman.
  9. S M Rizwan, KhuranaVipin and TanejaGulshan “Reliability Analysis of a hot standby Industrial System” paper published  in International Journal of Reliability, Quality and Safety Engineering, USA.
  10. Mr. Khalid Fathi Al Raheen, Dr.Askok Roy, Dr. K.P. Ramachandran & Prof. Harrison:  “Rolling Element Bearing Fault Diagnosis Using Morlet-Wavelet Envelope Spectra”. International Journal of COMADEM, Vol. 11, October 2008
  11. Zuhair Al Hemyari and Rizwan S M “Reliability Analysis of a Two Unit System” accepted for proceedings publication and presentation at IEEE International Conference on Industrial Engineering and Engineering Management, Singapore, December 2-5, 2007 p.1265-1268
  12. Edwin Browne R., De Silva. A.K.M., Ramachandran.K.P. Harrison.D.K.,M.L.Sheriff: “Coast Down Factor - a diagnostic tool to increase the reliability of Condition Monitoring of a Horizontal Rotor System”. Journal of The Institution of Engineers (India), Vol.90, April 17, 2009 pp 3-5
  13. K.Raja, V.Selladurai and R.Saravanan "A Genetic Approach for Scheduling Independent Jobs on Uniform Parallel Machines" Journal of Manufacturing Engineering, Slovakia, 4(6), p.12-16
  14. Al-Raheem, Khalid F., Roy, A., Ramachandran, K. P., Harrison, D.K. and Grainger, S. (2008): “Application of Laplace Wavelet Combined with Artificial Neural Networks for Rolling Element Bearing Fault Diagnosis”, ASME J. of Vibration and Acoustics, vol.130 (5), pp. 051007(1)-051007(9).
  15. Feroz, S. and Shah Jahan. “Removal of Copper Ions from Effluents using Coconut Shell Coke in a Fixed Bed Adsorber”, Caled. j. eng.Vol 4, 01, Jan-June 2008, pp 7-14.
  16. N.Prakash S.A. Manikandan L. Govindarajan and V. Vijayagopal, Prediction of biosorption  Efficiency for the Removal of Copper (II) Using Artificial Neural Networks" Journal of Hazardous Materials, 152, p.1268-1275
  17. S.Feroz, VSRK Prasad, C.Bhasker Sharma &L.Rao "Mass transfer studies with submerged impinging jets in closed cylindrical cell in the presence of solids” The Journal of Engineering Research. 5(1), p.30-36
  18. M.Uthayakumar, G.Prabhakaran and S.Aravindan, "Study on Aluminium Alloy Piston Reinforced with Cast Iron Inserts", International Journal of Material Science, 3, p.1-10
  19. K.Raja, V.Selladurai and R.Saravanan "Non-Identical Parallel Machine Scheduluing using Genetic Algorithm and Fuzzy Logic Approach", International Journal of Services and Operations Management, 4(1), p.72-101
  20. K.Raja, V.Selladurai and R.Saravanan "Quality Function Deployment in Agile Parallel Machine Scheduling through Neural Network Technique" Asian Journal of Scientific Research 1(2), p.146-152
  21. K.Raja, V.Selladurai and R.Saravanan "Earliness-tardiness scheduling on uniform parallel machines using Simulated Annealing and Fuzzy Logic Approach" Journal of Engineering Manufacture, Proc.1 Mech, 222, p-333-346.
  22. S M Rizwan, VipinKhurana, GulshanTaneja and Ahmed Mohiuddin, "Reliability Analysis of a single unit PLC with inspection” i - manager’s Journal on Future Engineering and Technology. Vol.3, No.4, pp19-26.
  23. Akram Pasha. (2008) Critical Appraisal of Web-based Learning Systems International Journal of Computer Science and Applications, Vol.1.No.1, pp.40-45
  24. M. MahanteshNadakatti, A Ramachandra& A. N. Santosh Kumar, "Artificial Intelligence-based Condition Monitoring for Plant Maintenance", Int. Jour. of Assembly Automation,  28,2, pp 143-150.
  25. NitinRaut& Shah Jahan, "Review of Membrane Bioreactors for Waste Water Treatment" Pharma Bio World, p.26-29.

A.2 Year 2008/2009

  1. S.Vishnupriyan, L.Govindarajan, G. Prabhakaran, K.P.Ramachandran, “Quality Improvement in Higher Education Through Normalization of Student Feedback Data Using Evolutionary Algorithm”, The International Journal of Applied Management & Technology, Vol.6, No.3, Nov.2008.
  2. Muruganandam, G.Prabhakaran, R.V.Murali “Prabha – A new Heuristic Approach for Machine Cell Formation Under Dynamic Production Environments”, The International Journal of Applied Management & Technology, Vol.6, No.3, Nov.2008 pp 191-221.
  3. Susan Rego, R.K.Yaji&K.N.Shenoy. (2008) Study of Strength Characteristics of Clay Roofing Tiles using Flyash as an adulterant, International Journal on Solid Waste Technology and Management (In press)
  4. L. Govindarajan, M. Rajasimman and C. Karthikeyan Artificial Neural Network Modeling of an Inverse Fluidized Bed Bioreacto, Journal of Environmental Science (In press)
  5. S.Feroz& VSRK Prasad,"Average mass transfer coefficients in electrolytic cells"  The Journal of Institution of Engineers (India), 88 pp 11-17.
  6. L. Govindarajan, B. Gopalakrishnan, L. Lakshminarasimman& P. KanthaBhaba, "Optimal design of Process Plant Using Evolutionary Algorithms", Chemical and Biochemical Engineering Quarterly. (In press)
  7. S. Feroz, NitinBhauraoRaut, & Suleiman Mohammed Al-Abry. "Residence time distribution studies in miniature pipes, Annals of Iraqi Science. (In press)
  8. Dr.K.P.Ramachandran, Dr.A.DeSilva, Prof. D.K.Harrison, Prof. MEI Sharif, R.Ediwn Browne, “Coast Down Factor – a Diagnostic Tool to Increase the Reliability of Condition Monitoring of a Horizontal Rotor System”, Journal of The Institution of Engineers (India), Vol.90, April 17, 2009 pp 3-5
  9. Raja, K and Selladurai, V (2009) “Minimization of total tardiness using Ant Colony Algorithm in parallel machines” International Journal of Manufacturing Research (In press).
  10. Al-Raheem, Khalid F., Roy, A., Ramachandran, K. P., Harrison, D.K. and Grainger, S. (2009): “Rolling Element Bearing Fault Diagnosis Based on Autocorrelation of Optimized Wavelet De-noising Technique”, International J. of Advanced Manufacturing Technology, vol.40 (3-4), pp. 393-402.
  11. Feroz, S. Venkateswara Rao, S. and Nageswara Rao, L. “Biological treatment of industrial wastewaters using up-flow anaerobic contact filter”, The Journal of Institution of Engineers, Vol 89, March 2009, pp 3-7.
  12. VinayakKrishnamurtyNaik&S.Manjappa. "Modeling Simulation of Sediment Analysis for Malaprabha River in Karnataka State, India" – A Case Study, Journal of Urban and Environmental Engineering, V.2, n.1(2008) - Jan-June 2008 ISSN: 1932-3932
  13. RajagopalRajinikantha.b, RengarajGanesha.c, Renaud Escudiea, InduMehrotrab, Pradeep Kumarb, Joseph V. Thanikald, Michel Torrijosa, "High rate anaerobic filter with floating supports for the treatment of effluents from small-scale agro-food industries" International Journal of Desalination and Water Treatment, Vol.4, 2009 pp 183-190
  14. SulaimanAyoob, Asok K. Gupta and Abi B. Basheer, "A Fixed Bed Sorption System for Defluoridation of Ground Water", Journal of Urban and Environemntal Engineering, V.3, n.1(2009) 17-22, DOI: 10.4090/juee.2009; ISSN: 1982-3932
  15. Srinivasan Alavandar and M. J. Nigam, “Comparative Analysis of Conventional and Soft Computing based Control Strategies for Robot Manipulators with Uncertainties”, International Journal of Computational Cognition, Vol. 7, No. 1, March 2009, pp. 52-61.
  16. Srinivasan Alavandar, Tushar Jain and M. J. Nigam, “Bacterial Foraging Optimized Hybrid Fuzzy Precompensated PD Control of Two Link Rigid - Flexible Manipulator”, International Journal of Computational Intelligence Systems, Vol.2, No. 1, 51-59, March 2009.

A.3 Year 2009/2010

  1. Mathew, A.G., Rizwan, S.M., Majumdar, M.C. and Ramachandran, K.P.. "Reliability modelling and analysis of a two unit continuous casting plant", Journal of the Franklin Institute
  2. VinayakKrishnamurtyNaik "Prediction of Dissolved Oxygen through Mathematical Modeling", International Journal of Environmental Research, Vol.4, No.1, Winter 2010 (January), pp. 153-160.
  3. Srinivasan Alavandar, Tushar Jain and M. J. Nigam, “Hybrid Bacterial Foraging and Particle Swarm Optimization for Fuzzy Precompensated Control of Flexible Manipulator”, International Journal of Automation and Control, Vol.4, No.2, pp 234-251, 2010
  4. Tushar Jain, Srinivasan Alavandar, M. J. Nigam, “A Hybrid Genetically-Bacterial Foraging Algorithm converged by Particle Swarm Optimization for global optimization”, International Journal of Bio-Inspired Computation, Inderscience publishers, likely to publish in Vol.2, No.2, 2010 (in press) 
  5. Srinivasan Alavandar and M. J. Nigam, “New Hybrid Adaptive Neuro Fuzzy Algorithms for Manipulator Control with   Uncertainties - Comparative Study”, ISA Transactions, Volume 48, Issue 4, Pages 497-502, October 2009.
  6. Srinivasan Alavandar, Tushar Jain and M. J. Nigam, “Particle Swarm Optimized Hybrid Fuzzy Precompensated Trajectory Control of Rigid-Flexible Manipulator”,             International Journal of Knowledge-Based and Intelligent Engineering Systems, Volume 13, Number 3-4, pp. 155-167, 2009.
  7. Tushar Jain, Srinivasan Alavandar, SVK Radhamohan, and M.J. Nigam Genetically-Bacterial Swarm Optimization: Fuzzy Pre-compensated PD Control of two link rigid-flexible manipulator, International Journal of Intelligent Computing and Cybernetics, (Publication queue)
  8. A.Vallavaraj, B.G.Stewart and D.K.Harrison, ‘An evaluation of modified µ-Law companding to reduce the PAPR of OFDM Systems’, Int J Electron Commun (AEU), doi:10.1016/j.aeue.2009.07.013.
  9. S. Vishnupriyan, M.C.Majumdar, K. P. Ramachandran: Optimization of machining fixture layout for tolerance requirements under the influence of locating errors, International Journal of Engineering, Science and Technology Vol.2, No.1,2010 pp 152-162
  10. G.K. Vijayaraghavan, M.C.Majumder, K.P.Ramachandran: Quantitative Analysis of Delimitations in GRP pipes using thermal NDTE Technique, Journal  of Advanced Research in Mechanical engineering, Vol.1 , 2010, pp 60-68. ISSN: 1737-9318
  11. S Vishnupriyan, K P Ramachandran, K P Padmanaban and M C Majumder, "Optimization of Machining Fixture, Layout considering Workpiece Dynamics", Caledonian Journal of Engineering, Vol.05, No.02, July-Dec 2009, pp71-77, ISSN 1999-9496
  12. G K Vijayaraghavan, M C Majumder and K P Ramachandran, "Nondestructive Testing and Identification of Defects in GFRP Pipes Using Pulse Active Infrared Thermography" Caledonian Journal of Engineering, Vol.05, No.02, July-Dec 2009, pp 62-70, ISSN 1999-9496
  13. A.G.Mathew, S.M Rizwan, MC Majumder, K.P.Ramachandran: Profit Evaluation of Single Unit CC plant with scheduled maintenance,  Caledonian Journal of Engineering Vol 05, No. 01  2009 ISSN 1999-9496,pp  25-34.
  14. R.V.Murali, A.B.Puri, G.Prabhakaran, (2010), "Artificial neural networks based predictive model for worker assignment into virtual cells", International Journal of Engineering, Science and Technology, Vol.2, No.1, 2010, pp.163-174
  15. Joseph v.Thanikal, Rangaraj Ganesh, RajgopalRajinikanth and RamamoortyAlwarRamanujam (2009) 'Anaerobic Treatment of Winery Wastewater in fixed bed reactors" Journal of Bioprocess and Biosystem Engineering, Springer - online publication
  16. Narasing Rao Galla, Govardhana Rao Dubasi (2010) "Chemical and Functional Characterization of Gum Karaya (Sterculiaurens L) seed meal"  Journal of Food Hydrocolloids, Vol 24, No.5, p.479-485
  17. R.SatishBabu, SatyanarayanaRentala, M.LakshmiNarsu, Y.Prameeladevi and D.G.Rao (2010) "Studies on Ethanol Production from Spoiled Starch Rich Vegetables by Sequential Batch Fermentation" International Journal of Biotechnology & Biochemistry, Vol 6, No.3, p.351-357
  18. G.R. Rameshkumar, B.V.A Rao, and K.P. Ramachandran, “Prediction of Coast Down Time for Mechanical Faults in Rotating Machinery Using Artificial Neural Networks” International Journal of Aerospace and Mechanical Engineering 4:1 2010 pp 14-21
  19. G.R. Rameshkumar, K.P.Ramachandran and B.V.A. Rao. “Evaluation of Unbalance and Misalignment Effect on Forward Curved Centrifugal Blower Using Coast – Down Time Analysis” International Journal of COMADEM, July 2010, pp 25-35.  ISSN: 1363-7681

A.4 Year 2010/2011

  1. R.Senthilkumar, K.Vijayaraghavan, J.Jegan&M.Velan "Batch and column removal of chromium(VI) from aqueous solution using Sargassumpolycystum", Journal of Environmental Progress & Sustainable Energy, 29(3), p.334-342
  2. A.M. Saravanan, A Abdul Gani et al.(2010)Remediation of Arsenic contaminated soils using a novel solvent extractant mixture, Journal of the Institution of Public Health Engineering, 2009-10, 4, p.9-13
  3. G.K. Vijayaraghavan, M.C. Majumder and K.P. Ramachandran.(2010) NDTE using Flash Thermography: Numerical modeling and analysis of delaminations in GRP pipes, Journal of the British Institute of Non-Destructive Testing, 52(9), p.481-487
  4. Amuthakkannan R, Babu C.K. and Kannan S.M.(2010) an approach to the minimization of makespan in the textile industry using ant colony optimization, International Journal of Services and operations management, 792, p.215-230
  5. Illayavel S. and Venkatesan A.(2010) Wear Characteristics of Manganese Phosphate Coated HSS Turning Tool on Machining En 24 Steel,Journal of Manufacturing Technology Today,9,p.8-13
  6. JosephrajJagen, Kuppusamy Vijayaraghavan, Senthilkumar Ramalingham, VelanManickam.(2010) Naphthalene degradation kinetics of Micrococcus sp., isolated from activated sludge, Journal of Clean-Soil Air Water, 38(9), p.837-842
  7. Rameshkumar, G.R., B.V.A. Rao and K.P. Ramachandran .(2010)Condition Monitoring of Forward Curved Centrifugal Blower Using Coast down Time Analysis, International Journal of Rotating Machinery,doi:10.1155/2010/962804
  8. VenkateswaraSarmaMallela, Parmal Singh Solanki,YousifJuma Ali-Al Harassi.(2010)Regulation of Energy Demands via DSM Policies: A Case Study in Oman, CanadianJournal of Electrical & Electronics Engineerin,1(3),p.54-59
  9. Parmal Singh Solanki, VenkateswaraSarmaMallela, Malcolm Allan, Chengke Zhou.(2010) Distributed Generation to Reduce Carbon Dioxide Emissions: a case study for residential sector in Oman, The Open Renewable Energy Journal, 3,p.26-32
  10. Parmal Singh Solanki, VenkateswaraSarmaMallela, Malcolm Allan, Chengke Zhou and K.G. Balakrishnan.(2010) DSM strategy based effective management of households to support energy sector, International Review on Modelling and Simulations,3(4), p.613-620
  11. Moammer Ali Saud AL-Tubi and Khalid F Al-Raheem, "Rolling Element Bearing Faults Detection, A Time-Domain Analysis", Caledonian Journal of Engineering, Vol.06, No.01, Jan-June 2010, pp 44-48, ISSN 1999-9496

A.5 Year 2011 April-September

  1. Al-Raheem, K.F., Abdulkarem, W., (2010). Rolling Bearing Fault Diagnostics Using Artificial Neural Networks Based On Laplace Wavelet Analysis, International Journal of Engineering, Science and Technology, Vol. 2(6), pp. 278-290.
  2. AL-Tubi, M.A.S. & Al-Raheem, K.F., (2010). Rolling Element Bearing Faults Detection: A Time-domain Analysis. Caledonian Journal of Engineering, vol. 06, no. 01, pp. 44-48
  3. Feroz, S., Rao, L.N. and Prabhakar, G., (2010). Adsorption of Lead and Zinc from Aqueous Solution using FicusBenghalensis L. as Adsorbent, International Journal of Engineering Studies Vol. 2(2), pp.231-246.
  4. Patil, S.G., Mandal, S., Hegde, A.V., and Srinivasan Alavandar., (2011). Neuro-Fuzzy based Approach for Wave Transmission Prediction of Horizontally Interlaced Multilayer Moored Floating Pipe Breakwater. Ocean Engineering, 38, pp.186-196.
  5. Senthilkumar, V. & Varghese, K., (2010). Analysis of Workflow on Design Projects in India. Special Edition: Journal of Design Management and Technology around the World. Vol. 5(3), pp.85-103.
  6. Sudhir, C.V., Dhanjaya, D.A. and Mohanan, P., (2010). Combustion Characteristics of Diesel Engine Operating on Jatropha Methyl Ester as Fuel. International Scientific Journal of Thermal Science. Vol. 14(4) pp. 965-977.
  7. Vishnupriyan, S., Majumder, M.C., Ramachandran, K.P., (2011). Optimal fixture parameters considering locator errors. International Journal of Production Research, DOI: 10.1080/00207543.2010.532167.
  8. Washington, A., (2010). HRM Culture Waves at Workplace: From a Human Capital Perspective. The International Journal of Business and Management Research, 3 (1), pp.15 – 26.

B) Conference Proceedings

B.1 Year 2007/2008

  1. Mr.Ramana Murthy Bhagavatula : “Pressure Drop and Mass Transfer Studies in Liquid Fluidized Beds “ ASME International Mechanical Engineering Conference and Exposition, Chicago, Illinois)
  2. Rizwan S M, S Ramanathan and Ahmed Mohiuddin “Dynamic learning with kinetic connections”  The Learning Technologies and Mathematics Middle East Conference, conducted by University of Arizona’s, Institute of Mathematics and Sultan Qaboos University, Oman, March 31-April 2, 2007.
  3. Unnikrishnan K “Analysis of Implementing a Temporal Database on a Conventional Relational Database and a model for Eliminating Redundancy ”, International Symposium on Data, Information & Knowledge Spectrum on December 13-15, 2007, Amrita University, Amritapuri Campus, Kerala.
  4. H. KalilurRahman: "New Facets of the library profession in the digital era: Problems and Perspectives", DELNET Conference on Libraries without boundaries: Reaching the Unreachable in Knowledge Era, NewDelhi, India November 20-23, 2007 p.490-499
  5. Rizwan, S.M., Mathew, A.G., Majumdar, M. C. and Ramachandran, K. P.. (2008), Reliability and Availability of a Continuous Casting Plant, Proc. IEEE, International Conference on Industrial Engineering and Engineering Management,  IEEE Engineering Management Society Singapore Chapter, Singapore, p. 541
  6. S.M.Rizwan, S.Ramanathan, Ahmed Mohiuddin and Padmavathi Narayanan"Dynamic Learning Beyond Classroom " Internation Conference on Education Technology ICOET2008, SQU, March 3-5, 2008
  7. Dr. Punam Datt "E-Learning and Traditional Learning in Oman - A case study" Internation Conference on Education Technology ICOET2008, SQU, March 3-5, 2008.
  8. Dr.K.P.Ramachandran,  Dr.S.M.Rizwan and Haris Kadir Mohammed " Optimal Inspection Frequency for Plant Equipment: Some Case Studies" International Conference on Plant Equipment and Reliability - ICPER2008, Kulalumpur, Malaysia - March 27-29, 2008, p.57-60.
  9. Mohamed Samiuddin "Power and DelaynOptimization of FPGA Routing" International Conference on Engineering Technologies (ICEVD2008) PDVVP College of Engineeing, Ahmednagar, India (paper presented) (March 2008)
  10. Parmal Singh Solanki, VenkateswaraSarmaMallela, Malcolm Allan and Chengke Zhou (2008), “Towards Demand Side Management: A Case Study in Oman”, Proc. 8th  IASTED International Conf. on Power and Energy Systems-Euro PES 2008, Corfu, Greece, p. 198-201
  11. Parmal Singh Solanki, VenkateswaraSarmaMallela and Chandrasekhar Kari (2008), “Simulation Model of Hourly Temperature Profiles of the Dakhilya Region for Demand Side Management”, Proc. 2nd International Conference on Industrial Applications of Energy System-IAES2008, Sohar, Oman, p.148-152.
  12. S. Feroz &NitinRaut. "Environmental safety and health concerns of the application of nanomaterials", proceedings of National conference on Environmental Engineering and Management, Feb 15-16, India.
  13. R.V.Murali, D.Ragavesh&G.Prabhakaran, "Astudy, design and optimization  o virtual cellular manufacturing systems" Proceedings of Computer Aided Production Engineering, Glasglow Caledonian University, UK June 6-8, p.63-70

B.2 Year 2008/2009

  1. S.Mandal, S.G.Patil, Y.R.Manjunatha& A.V. Hegde. (2008) Application of neural networks in coastal engineering- an overview, 12th International Conference on International Association for Computer Methods and Advances in Geomechanics (IACMAG), at Marriott, Goa, 1-6 October, p. 1639-1645.
  2. B.G.Stewart and A.Vallavaraj (2008) The Application of Mu-Law Companding to the WiMax IEEE802.16e Down-Link PUSC, Proc.14th  IEEE International Conference on Parallel and Distributed Systems, ICPADS ‘08, Australia, pp.902 – 907, pp.896 – 901
  3. A.Vallavaraj, B.G.Stewart, D.K.Harrison and F.G.McIntosh (2008) Reducing the PAPR of OFDM Using a Simplified Scrambling SLM Technique with No Explicit Side Information, Proc. 14th  IEEE International Conference on Parallel and Distributed Systems,ICPADS ’08, Australia, pp. 902-907.
  4. Feroz, S. and Nageswara Rao, L. Application of tapered fluidized bed bioreactors for waste water treatment”, iiche-chemcon-27th -30th Dec 2008, Chandigarh, India
  5. S. Vishnupriyan, L. Govindarajan, K. P. Ramachandran and G. Prabhakaran, “Quality Improvement In Higher Education Using Artificial Intelligence Based Student Feed Back Evaluation” Oman National Quality Conference on Quality Management and Enhancement in Higher Education, 28-29 October 2008, Muscat, pp24.
  6. Mudgal, V. Mudgal& A. Srivastav, "Availability and uses of biogas in an efficient and feasible way, as a source of energy, for different operations” International Conference on Harnessing Technology, Organized by Caledonian College of Engineering, Oman, October 13-15, 2008
  7. Feroz S. &Nitin B. Raut "Utilization of Solar Energy in Degrading Organic Pollutant – a case study", International Conference on Harnessing Technology, to be Organized by Caledonian College of Engineering, Oman, October 13-15, 2008
  8. Feroz S. & Mustafa "Quality management in education-a case study", The first national conference for quality, promoted by Oman Quality Network in association with Ministry of Higher Education and Oman Accreditation Council, Oman which is going to be held during October 27-29, 2008.
  9. Mathew, A.G., Rizwan S.M., M.C. Majumdar and Ramachandran, K.P., and Taneja, G.. "R09164 - Optimization of a Single Unit CC Plant With Scheduled Maintenance Policy", Proc. 2nd International Conference on Recent Advances in Material Processing Technology, National Engineering College, India, p. 609-613., ISBN:978-81-904334-1-9
  10. Mathew, A.G., Rizwan, S.M., Majumdar, M.C. and Ramachandran, K.P.. "MTSF and Availability of a Two Unit CC Plant", Proc. Third International Conference on Modeling, Simulation and Applied Optimization, College of Engineering, American University of Sharjah U.A.E, Sharjah, UAE, January 20-22, 2009.
  11. S.Mandal, S.G.Patil& A.V. Hegde. (2009) Wave transmission    prediction of multilayer floating breakwater using neural network, Proceedings of 3rd International Conference in Ocean Engineering (ICOE), at IIT Madras, 1-5 February, p. 574-585.
  12. Parmal Singh Solanki, VenkateswaraSarmaMallela, Chengke Zhou and Malcolm Allan “Development of Temperature Profile Simulation Model for Demand Side Management”, Proc. 3rd International Conf. on Modeling, Simulation and Applied Optimization-ICMSAO 2009, Sharjah, UAE.
  13. G.R.Rameshkumar, B.V.A.Rao, K.P.Ramachandran, "An Experimental Investigation to Study the Effect of Misalignment using CDT as a condition Monitoring Parameter for Rotating Machinery", COMADEM2009 22nd International  Congress, Spain, 9 - 11th June 2009, pp 531-539, ISBN: 978-84-932064-6-8

B.3 Year 2009/2010

  1. I.S.Hammoodi, B.G.Stewart, A.Kocian, S.G.McMeekin, "A comprehensive Performance Study of OPNET Modeler for ZigBee Wireless Sensor Networks" 3rd International Conference and Exhibition on Next Generation Mobile Applications, Services and Technologies (NGMAST2009) 15-18 Sept 2009, Cardiff, Wales, UK. (communicated)
  2. B.G.Stewart and A.Vallavraj, ‘BER Performance Evaluation of Tail-Biting Convolution Coding Applied to Companded QPSK Mobile WiMax’, Proc. 15th IEEE International Conference on Parallel and Distributed Systems, ICPADS ’09, Shenzhen, China, pp.734 – 739, December 2009.
  3. Aniyankunju C.M., S.Feroz "Palm Date Seeds and its Application as Activated Carbon" - A Review, Proceedings of the 2009 International Conference on Chemical, Biological and Environmental Engineering, Singapore 9-11, October 2009, ISBN-13-978-981-4293-46-4
  4. G.R.Rameshkumar, B.V.A.Rao, K.P.Ramachandran, "Study and Analysis of the Effect of Unbalance in Forward Curved Centrigufal Blower Using Coast down Time: An Experimental Investigation; ICAMB 2009 - Dec. 14-16, 2009; VITUniversity, pp 737-741
  5. G.K.Vijayaraghavan, M.C.Majumder, K.P.Ramachandran, "Experimental Study of Delaminations in GRP Pipes Using Infrared Thermography NDT Technique. Proceeding of the 3rd Internation Conference of Advances in Mechanical Engineering, January 4-6, 2010, S.V.National Institute of Technology, Surat, India, PP:687-961
  6. G.R.Rameshkumar, B.V.A.Rao&K.P.Ramachandran: Coast Down Time analysis used as a condition monitoring parameter to experimentally assess the effect of misalignment for forward curved centrifugal blower; International conference on advances in Mechanical engineering(ICAME) , India, August 2009,pp121-125.
  7. R.V.Murali,  A.B.Puri, K.F. Al-Rahim and G.Prabhakaran, Comparison of Feed Forward and Radial Basis Function Neural Networks for Worker Assignment into Virtual Cells, accepted for oral presentation at 21st International Computer-Aided Production Engineering Conference (CAPE 2010), The University of Edinburgh, 13-14 April 2010.
  8. R.V.Murali,  A.B.Puri, and G.Prabhakaran, GA-Driven ANN Model for worker assignments into Virtual Manufacturing Cells, accepted for oral presentation at International Conference on Manufacturing Engineering & Engineering Management, WORLD CONGRESS ON ENGINEERING, June-July 2010, London, UK
  9. Holi Ibrahim holi Ali, "Profiting from Learner and Teacher Investment in ELT", International Conference of English language Teaching (ICELT 2009), University of Putra, Malaysia - 10-11 November 2009
  10. Berrington ntombela "English Language Teaching and the Promotion of Academic Ethics", International Conference of English language Teaching (ICELT 2009), University of Putra, Malaysia - 10-11 November 2009
  11. H.KalilurRahman: “Role of Bibliographic Records Formats in Information Dissemination in the Electronic Information Era: Problems and Perspectives" at the 16th Special Library Association - Arabian Gulf Chapter Conference held in Abu Dhabi during March 2-4, 2010

B.4 Year 2010/2011

  1. Mathew, AG, Rizwan S.M., Majumder M.C, Ramachandran K.P. and Taneja G. “Comparative Analysis between Profits of the Two Models of a CC Plant” International Conference on Modeling Optimization and Computing (ICMOC2010)pp 226-231 ISBN: 978-0-7354-0854-8 (October 28-30, 2010 – NITD)
  2. G.K. Vijayaraghavan, M.C. Majumder, K.P.Ramachandran, A.Muruganandam and L.Govindarajan “Estimating Parameters of Delaminations in GRP Pipes Using Thermal NDE and ANN” International Conference on Modeling Optimization and Computing (ICMOC2010), India  pp 350-355 ISBN: 978-0-7354-0854-8  (October 28-30, 2010 – NITD)
  3. S.Vishnupriyan, M.C. Majumder, K.P. Ramachandran: “Effect of Workpiece Fixture Contact Friction on Machining Error” International Conference on Modeling Optimization and Computing (ICMOC2010) pp 350-355, ISBN: 978-0-7354-0854-8  (October 28-30, 2010 – NITD)
  4. Sumit Kumar Banerjee (2011) Controlling of delay epidemic model by vaccination policy, International Conference on computational and statistical sciences, 25-27 January, 2011, Dubai, UAE
  5. Saravanan, Seema Roopesh and Merlin.(2010)A study on the efficiency of polyethylene glycol as additive for the removal of phenol from its solution using tamarind shell ash as adsorbent, 63rd Annual session of the Indian Institute of Chemical Engineers, 27-29th December, 2010, Annamalai University, India(accepted for presentation)
  6. Holi Ibrahim Holi Ali.(2010)Portfolio assessment: Does it really work? , presented in 14th  Annual Current Trends in English Language Testing Conference(CTELT), 4-5 November, 2010, Dubai.
  7. Holi Ibrahim Holi Ali.(2010) Portfolio assessment approach; Teachers and Students perspectives, presented in 10th  International TEFL Conference, 7-9 October,2010, Syria.
  8. S.M. Saheb,A.K. Bhattacharjee and A. Vallavaraj.(2010) A combined technique to improve fairness in HCCA scheduler for 802. 11e wireless LANs, presented in IEEE International Conference on advances in Communication, Network and Computing (CNC2010), 4-5 October, 2010, Calicut, India.
  9. Holi Ibrahim Holi Ali.(2010)Utilizing ICT in Teaching  English, presented in 9th  International Internet Education Conference,14-16 September,2010, Egypt.
  10. H KalilurRahman.(2010) Studies on features of online public access catalogues of academic libraries in gulf cooperation council nations, presented in International Conference on Innovation-Driven Librarianship:Expectations of libraries and Library users, 17-19 June,2010, SRM University, Chennai, India.
  11. Holi Ibrahim Holi Ali.(2010) Does E-Black board really foster learner autonomy, presented in 8th Malaysia International Conference on English Language Teaching, 11-13 May, 2010, University Putra, Malaysia.
  12. G.K. Vijayaraghavan, M.C. Majumder & K.P. Ramachandran.(2010)Experimental study of Delaminations in GRP pipes using Infrared Thermography NDT Technique, published in the proceeding of  3rd International Conference on Advances in Mechanical Engineering (ICAME 2010), S.V. National Institute of Technology, India, p.687-691
  13. G.K. Vijayaraghavan, M.C. Majumder & K.P. Ramachandran.(2010) Modelling and Simulation of step pulsed Active Thermography to Analyse Delaminations in GRP Pipes, published in the proceeding of  International Conference on System Dynamics and Control (ICSDC 2010), Manipal Institute of Technology, India, p.670-675
  14. S.Sundaravalli, G.K.Vijayaraghavan& M.C. Majumder.(2010) Estimation of required heat input for the evaluation of Disbonds in FML using Thermography, published in the proceeding of International Conference on Modeling, Optimization & Computing (ICMOC 2010), NIT, Durgapur, West Bengal, India, p.129-134
  15. S.Vishnupriyan, M.C. Majumder, K.P. Ramachandran.(2010)Contact modeling of workpiece fixture system considering chip removal, published in the proceeding of International Conference on system dynamics and control, MIT, Manipal, India, p.130-136
  16. Rameshkumar,G.R., B.V.A. Rao and K.P. Ramachandran.(2010) Coast Down Time Prediction for Unbalance Fault in Rotating Machinery Using Radial Basis Networks, published in the proceeding of International Conference on System Dynamics and Control (ICSDC-2010),Manipal Institute of Technology, Manipal University, Manipal, India, p.141-144
  17. Jayavrinda Vrindavanam.(2010) video Compression for Movie Transmission: A comparative Analysis,published in the proceeding of International Conference and Workshop on Emerging Trends in technology (ICWET 2010), Mumbai, India,p.173-175
  18. S.M. Saheb,A.K. Bhattacharjee and A. Vallavaraj.(2010) An enhanced HCCA based adaptive scheduler for multimedia traffic in IEEE 802.11e wireless LAN, published in the proceeding of International Conference on wireless network, ICWN’20, Las Vegas, USA, p.446-453
  19. R.V.Murali, A.B.Puri and Khalid Fathi.(2010) Development and application of ANN model for worker assignment into virtual cells of large sized configurations, published in the proceeding of International Conference on Modeling, Optimization and Computing, NIT, Durgapur, West Bengal, India, p. 362-367
  20. T.A. Sulaiman and S. Feroz, "Study the Effect of Photocatalyst in the Desalination of Sea Water by Solar Energy" Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp30
  21. Abdullah Al Siyabi, Anna Jesil, J.P.Sarkar and S. Feroz" Solar Photocatalysis to Remove Organics in a Flat Plate Reactor" Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp32
  22. Ibrahim Al Ajmi, M. Ramaswamy, Ilango, Ali Alawi, FarooqAljahwari, "Development of Solar Energy Based Refrigerator for Domestic Use in Sultanate  of Oman" Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp31
  23. AnkitSachdeva, VeenaValsamma Daniel, N. Meyyappan, B.G. Prakash Kumar. "Reliability of Solar Energy System", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp33
  24. Saud Talib Saud Al Amri, A.G.Mathew, S.M.Rizwan, "Reliability and Availability Assessment of a Centrifugal Pump", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp34
  25. Dharmasa, SrikantSurpam, SrinivasGoud, S Ravi Chander, Fahad KSRK, "Evaluation of Reliability Range Indices for Single Solar Power Based Radial Distribution Networks with Data Uncertanities", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp35
  26. Salim Al Ramadhani, Illango, Ali Alawi, M. Ramaswamy, "Experimental Study on Thermosyphon Solar Water Heater in the Sultanate of Oman", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp39
  27. N Meyyappan, S Feroz, B G Prakash Kumar, "Bio Electro Chemical Fuel Cells - A Review", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp41
  28. Shakir Al Yarubi, R V Murali, Ahmed Al Yarubi, "Design, Construction and Performance Evaluation of Solar Dryer in Sultanate of Oman", Proceedings of the International Conference on Harnessing Technology (ICHT2011) held at Muscat on 13-14 February 11, pp44.

B.5 Year 2011 April-September

  1. Achuthan, M., Rajeshkanna, P. &Rathinasamy, R., (2011) Performance Evaluation of locality based Compact Solar Refrigeration system. ln: International Conference on Thermal Energy and Environment (INCOTEE 2011), 24-26 March, 2011, Kalasalingam University, Krishnan Koil. Tamil Nadu, India
  2. Banerjee, S.K. and Mishra, O.P., (2010). Modeling the effect of vaccination policy on epidemics with time delay. In: International Conference on Mathematical Applications in Engineering (ICMAE), 3-5 September, 2010, Kuala Lumpur, Malaysia.
  3. Banerjee, S.K., (2011). Controlling of delay epidemic model by vaccination policy. In: International Conference on Computational and Statistical Sciences (Organized by World Academy of Science Engineering & Technology-WASET), January 25-27, 2011, Dubai.
  4. Feroz, S., Prasad, V.S.R.K. & Rao, L.N., (2010). Comparative studies on removal of cadmium metal ions from effluents using coconut shell coke and commercial activated charcoal. Proceedings of ICEM’10, 2nd International Conference on Environmental Management (Climate change mitigation technologies – Policies and regulations to mitigate climate change, 25–28 October, 2010, pp 1006-1013.
  5. Feroz, S. & Rao, L.N., (2010). Removal of Lead Ions from Aqueous Solutions by Ficusbenghalensis. L as Adsorbent, Indian Chemical Engineering Congress ln: 63rd Annual Session of Indian Institute of Chemical Engineers, 27-29 December, 2010, Annamalainagar, India. 
  6. Hasan Ali, A.A. && Jayavrinda, V., (2011). Performance Analysis of QPSK Transmitter for Biomedical Applications. In: Third International conference on Machine Learning and Computing. 26-28 February, 2011, Singapore.
  7. Mahalingam, P., Jayaprakash, N., and Karthikeyan, S., (2010). Growth of Digital Contents and Information Management Using Storage Area Networks. Proceedings of International Conference on Internet Studies (NETs2010), Taipei, Taiwan, 25-27 November, 2010.
  8. Mahalingam, P., Jayaprakash, N., and Karthikeyan, S., (2010). Capacity Planning Analysis Model and Forecasting of Storage Usage for Storage Area Networks, ln: International Conference on Intelligent Networks and Computing, Kuala Lumpur, Malaysia, 26-28 November, 2010.
  9. Ramachandran, K.P., Al-Raheem, K.F. and Rao, B.K.N., (2010). Recent trends in systems performance monitoring & failure diagnosis. ln: The IEEE International conference on industrial engineering & engineering management, 7-10 December, Macao, Conference Proceedings, pp. 2193-2200. IEEE, Online: IEEEXplore.
  10. Rao, D.G., (2010). Dates processing: Enzymatic Liquefaction of Date Pulp. ln: International Symposium on new technologies for food processing industry, SQU, Muscat, 19-21 December, 2010.
  11. Rego, S.R., Pinto, V. & Prince, J., (2011). Strength characterization of pavement blocks having same mix design as of concrete cubes. In: National conference on Recent Developments in Civil Engineering (RDSE 2011), 13-15, January 2011 Manipal, India. 
  12. Sundaravalli, S., Vijayaraghavan, G.K., & Majumder, M.C., (2010). Estimation of Required Heat Input for the Evaluation of Disbands in FML Using Thermography. ln: International Conference on Modeling, Optimization & Computing (ICMOC 2010), National Institute of Technology, Durgapur, India, 28-30 October, 2010, Conference Proceedings, Volume 1298, pp. 129-134. ISBN: 978-0-7354-0854-8. Online: American Institute of Physics
  13. Vijayaraghavan, G.K., Majumder, M.C., Ramachandran, K.P., Muruganandam, A. &Govindarajan, L., (2010), Estimating Parameters of Delaminations in GRP Pipes Using Thermal NDE and ANN. ln: International Conference on Modeling, Optimization & Computing (ICMOC 2010). National Institute of Technology, Durgapur, India, 28-30 October, 2010, Conference Proceedings, Volume 1298, pp. 350-355. ISBN: 978-0-7354-0854-8. Online: American Institute of Physics
  14. Vishnupriyan, S., Majumder, M.C. and Ramachandran, K.P., (2010). Effect of workpiece fixture contact friction on machining error. Proceedings of the International Conference on Modeling, Optimization & Computing (ICMOC 2010). National Institute of Technology, Durgapur, India, 28-30 October, 2010, Conference Proceedings, Volume 1298, pp. 350-355. ISBN: 978-0-7354-0854-8. Online: American Institute of Physics